Mevotech VS Moog - The ultimate guide!

This post may contain affiliate links. Your support is appreciated! Learn more

Mevotech VS Moog?

This is the burning question this article seeks to answer.

If you are replacing or upgrading you suspension, steering or wheel bearings with aftermarket performance parts, you’ll likely have come across these two brands.

But, you are unsure who makes the superior product.

What you need is a detailed Mevotech review and Moog review to demystify the issue.

Well,

You’re in luck because this article does just that by pitting the different products offering against each other to see how they stack up.

Not only that, we also look at some actual data, reviews, case studies and tests so we can make a well informed decision.

Check out the manufacturers themselves: Mevotech and Moog.

Mevotech VS Moog: let’s get some facts

Generally, both Mevotech and Moog are referred for their wheel bearings, sturdy ball joints, or control arms. The issue with the products, Mevotech and Moog is their kits are not available with bushings and they must be bought separately.

Both brands offer quality that is better or equivalent to original manufacturers.

This is important to keep in mind as you do not want to replace your original parts with inferior aftermarket replacements.

However, first prize is finding a product that is better than the original part. On this subject, let’s talk about the following test:

Independent testing proves Moogs durability is 5x better

Most people find Mevotech to be convincing when it comes to its durability and overall performance.

However, a test has been conducted proving that Moog massively outperforms Mevotech…at least when it comes to durability.

To come to such a conclusion, a metallurgical analysis was done on ball studs from competing brands.

The result was that Moog ball joints have up to 5 times the durability of original ball studs when tested on a few different vehicles.

This is quite a strong statement so, for clarity check the result below:

This analysis included Mevotech equivalent product which was also determined to be inferior in durability than the Moog.

Moog performs significantly and better in comparison to Mevotech. Actually, it blows the water out of the OEMs. This was observed after the chemical composition rigorous testing, shot peening, treatment trials, etc.

Mevotech products are at reasonable prices and are equally high-quality.

Mevotech vs Moog Face To Face Comparisons:

Where car-tuning is concerned, many vehicle owners tend to ignore suspension components. Many of them suppose that buying a set of bolts or wheel bearings from any brand would be enough, which is not what the case actually is.

Both Mevotech and Moog are two famous brands that sell automotive parts. So how do the two brands fare against each other?  Check out this Mevotech VS Moog face to face comparison.

1) Wheel Bearing and Hub Assembly

If you have ever rotated your car steering wheel and heard a discomforting screeching sound, it is actually the wheel bearing of your car that is in need of a replacement. The two brands - Mevotech and Moog - have their own wheel bearing and hub assemblies.

Mevotech Wheel Bearing and Hub Assembly

Mevotech H513263 Wheel Bearing and Hub Assembly is offered with full manufacturer warranty. It has been designed in keeping with OEM specifications and spotting, evaluating and improvement of all those areas that have to be bettered.

Every component of this system is lubricated beforehand with grease, so as to reduce friction and wear and tear. These are also sealed at the time of manufacturing, so as to make them better guarded against dust and debris on the road.

Additionally, these can be appropriate substitutes for vehicles. There are flanges that help reduce vehicle shaking and keep the inner bearing integrity maintained. The strong and heavy-duty integral raceway improves stiffness and reduces vibrations.

There are oversized ball bearings that let the hub bear the additional load and prolong its longevity. The ABS Sensor of OE-style is kept within the hub assembly, which ensures better signal and connection.

Moreover, there is no maintenance needed. The noise of the vehicle is reduced, which allows smooth running. It can be installed with ease and offers an amazing fit. However, there are some complaints that the sensors cease to function after some days.

MOOG Wheel Bearing and Hub Assembly

It is by Moog and is designed to overcome various challenges and offer reliable and smooth performance. There are Wheel Stud Bolts having corrosion and rust resistant protective coating, which offers more convenient removal and efficient wheel nut torquing.

Specifically, MOOG Abrasion-Resistant ABS Cord is made out of a blended material, which offers better ABS protection, safeguards against bad conditions and boosts abrasion resistance.

Super strong socket and shield connections are ABS-molded and can offer the best protection from contamination – which offers more durability.

The assembly has been tested for quality and has proven performance levels. It is available for various domestic and foreign vehicles. These have design enhancements that are specific to applications, and which offer maximum ABS performance, smoother operation, and higher longevity.

2)  Control Arm & Ball Joints

The control arm happens to be a vital component of the suspension system of a vehicle. It offers stability to a vehicle by having the wheels attached to the frame. It is important to purchase a superior control arm. As you can see, both brands have high-quality offerings:

Mevotech Control Arm with Ball Joint

This one is by Mevotech and is made of solid steel. There is no flex here, and it tightens the front end and lets you handle your vehicle easily on bumpy, curvy roads. The control arms have the ball joint and bushing already set up in them.

Mevotech arms can be set up with ease, and offer a perfect fit. These are well made, and the superior construction ensures that these can last for a long time to come.

Moog Control Arm and Ball Joint Assembly

Check Details

It is by Moog and comes with the promise of easy installation, latest steering and a higher lifespan. This one is black in color and is made of forged steel.

Actually, it is over 13 inches in length. The socket is well designed and can be greased well. The use of new lubricant can help flush contaminants out of the ball joint assembly, thus reducing wear and corrosion.

The full ball metal stud offers more responsive steering due to the rotational, consistent and smooth movement for 36 degrees. It is made of steel, which makes the component stronger in form.

Therefore, the patented cover plate design offers more longevity to the part. There is an exclusive cover plate that safeguards against the leaking of contaminants into the surface of the ball bearing.

Why Moog Is Special?

The Specialty of Mevotech and Moog

The “Problem Resolver” winner- If Moog stuck its way to ball joints and suspension lower-end kits, this battle will not go much further and will conclude in a draw.

Without any doubt, it is a Problem Resolver. It proves its tagline and performs a wonderful job at resolving the worries of suspension.

However, it is an easy way of distinguishing the products of Moog as you can find there will be initials ‘CK’ in golden color. The problem resolver products focus on three important improvements in comparison to other brands such as:

  • The ball joints are in Powder-coated metal ensuring extra durability.
  • Easy to service as there is grease fitting.
  • The arm design is intelligent to offer quick installation and better fit.

Moog handles all the pain points with respect to ball joints. There are several OEMs that lack great fitting and this makes the ball joints servicing a real pain.

In fact, some also come with a clunky fit and tinkering around them to make it functional is tough. The aftermarket or OEMs brands feature plastic parts and instead, you get this Problem Resolver series than the powder-coated metal.

Taking Mevotech vs Moog parts into consideration, the Moog chassis parts were initially solely manufactured in the USA, but now the Moog parts arrive from many countries.  There is o way to predict where to receive the part.

Basically, the real and best way is to check the label as now it is manufactured all over the globe. With global manufacturing and the global economy, Moog is also a part of this manufacturing trend.

Furthermore About Why This Comparison

Mevotech has a better nod with respect to bushings, control arms, and ball joints. They service with bushings for convenience. The bushings are not expensive and it is also easy to place a new order and to enjoy the overall performance.

Thus, the Mevotech has pretty good ends and they are equal to Moog. It may be better and distinctive featuring a combination of black and blue design.

Mevotech certainly surpasses the older Moogs products. Though, the Moog wheel bearings feature newer generations. Eventually, the Moog wheel bearing newer generations perform better and the ABS cord is durable.

Changing your ball joints as a DIY may be exciting in the first attempt. It also includes the fear of going wrong. Moog replacements fit like a glove and the extra puffing and huffing are spared.

A common mistake is to ignore the tools and to get assemblies working properly. Everyone knows you need to impact sockets and a wrench. Ensure you have a pry bar or a ball joint tool used to separate.

This helps in cutting the time for replacement and to ensure an effortless task. However, working using a hammer is infuriatingly slow and is a total pain. For more ideas, it is best to check some videos to get an idea about dealing with the ball joints or replacing the control arms.

Final verdict

Mevotech VS Moog is a hot topic for more than thirty years in the automotive aftermarket. They have been innovating and learning to ascertain each offers the best technologically advanced automobile parts in high quality, while they deliver the best support and customer service in the industry.

When it comes to design, quality of construction and longevity, the products from Mevotech edge a little past those of Moog. However, that is not to say that Moog is not a good brand. For NASCAR Crew Chiefs and professional technicians, Moog is the suspension and steering brand of choice.

Both have got good reviews for various aspects, and seem to have ticked many of the right boxes for customers out there. If you need high-quality suspension components for your vehicle, you may choose either of these brands.

Sources:

https://www.moogparts.eu/support/light-vehicles/competitor-tests/ball-studs.html - Test results

If you found this post helpful, Share it with your friends...

Leave a Comment